Quote:
Originally Posted by 6mt370
You need custom brackets. To install aftermarket seats you'll pretty much need to redo everything. Brackets, sliders, resistor for the airbags, and a custom harness bar to use harnesses if you cant swap over the stock seat belt clip.
|
It's actuallly not to bad, you can remove the seat from the stock brackets and use it with the slider and bracket. U cut the slider off and reweld it a little higher up and it will probably cost u around 80 at a shop rather than 300 for brackets. Also u don't need the stock seatbelt but it's very easy to remove and reinstall into the new bracket if u buy one. And after market seats don't usually come with airbags, u will either clear the code so the light doesn't keep flashing or just kinda live with it because u won't have anything to plug into the wiring harness