I bought a salvage Z. Airbag was blown, seller had stripped the bolts. I tried all the suggestions in this thread to no avail. A few things I also tried unsuccessfully but not, I think, in this thread:
1. Use next size up torx, t35 security and pound in with hammer.
2. Increase friction with any of the following; valve grinding compound, rubber band, duct tape, green scrubber material from back of sponge, steel wool.
So I was at the point of drilling them out but decided to see what my local shop said. Their mechanic with 25 yrs experience got them out. He did a lot of picking at them from what I could see and got the intended bit to finally grab. Well worth the 50 bucks to keep me from screwing it up further. I was having nightmares about how to hold the drill steady and how it would interact with the small security pin in the middle of the bolt. To the guy who got it out with needlenose visegrips, you dah man, I tried several and no way could I get them in there...
|