Quote:
Originally Posted by NorthStyle
Did anyone ever provide you information/pictures for the CMAK kits to see if the piping could be modified to fit?
|
Here is Sasha's opinion on the CMAK:
"Thank you very much for the pictures, these are great.
It is so hard to say if it will fit. I think with a bit of ball pin hammer work on the IC pipe, it will work. This is not a big deal, as the pipes are full 2mm thickness, so there is no worries with massaging the pipe a bit for clearance.
I could probably also make that full first section of pipe out of 2.25" tubing, instead of the 2.5". This would also help with creating clearance."
Unfortunately I pulled mine off and replaced it with the OS Giken delete, but they are give or take the same size. In this image its hard to see but you can kind of see how to delete kit gets in the way on the bottom left there.
Tuesday we plan to be cutting back on the second piece of piping a bit & fabricating a small section to fit from there to the first full section after the turbine. As you can see there is plenty of space. So the answer is yes it can be done, with some modification.