Don't have any to sell.
However,here is a FYI on how best to install them(if you find them).
Do not use 3-M tape that is usually provided with cover.
Seal All adhesive that can be found at most auto parts stores&hardware...
is perfect. You do not want any thickness of adhesive tape. Best to have both
surfaces mate perfectly. Seal Tite will do this. It is pretty much a contact cement in a tube . Use a stiff brush to apply to both surfaces and let set a bit.
Press&hold for a minute--done.
An extra on using Seal All vs 3-M tape,you can slide it around a bit to position.
The only negative,this stuff is permanent. Cannot be removed.
Also,be careful not to get any on surrounding surfaces. Will mark the surface.
Mask around...
Good luck
|