Nissan 370Z Forum - View Single Post - Seatbelt Harness installed

blueranger · 08-20-2017, 12:43 PM

I recently installed a seatbelt harness with aftermarket seats. I would like to remove the stock seat belts and need to find an ohm resistor to bypass the pre-tension sensor. Similar picture shows the sensor connection.

I checked the OHMS with a multimeter and it gave me 2.3 - 2.4ohm. I tried a 2.5ohm resistor and it did not work.

I have been able to bypass the the other seatbelt sensor that detects seatbelt engagement but cannot remove the actual seatbelt without finding a ohm resistor for the pre-tensioner.

Has anyone done this who added a seatbelt harness?

Sent from my iPhone using Tapatalk

08-20-2017, 12:43 PM	#1 (permalink)
blueranger Track Member Join Date: Aug 2012 Location: Albuquerque NM Posts: 577 Drives: 2010 Roadster 7AT Rep Power: 307	Seatbelt Harness installed - Pre tension sensor bypass? I recently installed a seatbelt harness with aftermarket seats. I would like to remove the stock seat belts and need to find an ohm resistor to bypass the pre-tension sensor. Similar picture shows the sensor connection. I checked the OHMS with a multimeter and it gave me 2.3 - 2.4ohm. I tried a 2.5ohm resistor and it did not work. I have been able to bypass the the other seatbelt sensor that detects seatbelt engagement but cannot remove the actual seatbelt without finding a ohm resistor for the pre-tensioner. Has anyone done this who added a seatbelt harness? Sent from my iPhone using Tapatalk __________________ F.I. Stage 1 Twin Turbo #48 \| E85 FlexFuel \| Built 7AT \| F.I. 34 Row Oil Cooler \| F.I. Flex Plate \| F.I. 19 row Trans Cooler \| MT ET Street S/S \| ECUTEK Tuned by Seb \| RPM Roll Bar