In relation to the above info. Setting zero toe will allow the front tires to gain more toe out under compression in the front (braking/turning/bump). In addition to this, Adding toe-in on the rear (only) will actually increase the wandering on the front axle as it changes the pivoting angle slightly. As mentioned above, its best to set a bit of toe in on both axles. If you set zero toe front, you will actually get better high speed straight line stability with a bit of toe out in the rear. Under rear compression the car is set to toe in (acceleration/turn/bump). During cruising and hard braking however it may fish tail a bit more.
To mitigate both instances, it's best you get rid of the rubber lca bushings for something a bit stiffer.
Sorry for the oddly worded description. Typing from phone.
|