Quote:
Originally Posted by slammedsammy
Has anyone solved this issue on their Z? My car is experiencing the same thing. Any insight would be helpful...I have replaced both the cam and crank sensors. Uhg... HELP!
|
I recently had a similar issue. My car only started with the cam sensor unplugged and drove around fine in limp mode. The dealership closest to me has repeatedly screwed me over, so I decided to repair the car myself.
The issue was that my timing was off quite a bit (-30* bank 1, -22* Bank 2). I had to use a snazzy Snap-On diag computer and some time. After a quick search, I discovered that my cam phasers were seized. I changed the cam phasers and set the timing back to spec (10hr job and those fu#^ers are expensive new). The service manual is also a huge help. Now the car starts right up, as it should. I hope this helps.