Quote:
Originally Posted by jwick
You could probably fabricate an intake pipe and route the filter wherever you want but I don't think it's required. You would have to drive thru water deeper than the center of your axel hubs before you would get water on the filter. Driving through a puddle won't matter cuz there's enough heat to evaporate it away.
What most people don't realize is some of the TT lots have he filter just as low. The GTM kit route the filter to the bumper where the washer fluid reservoir used to be and it's about the same elevation as my BP filter.
|
It's kind of hard to tell looking at the underside pics of the BP kits but it seemed like the filter was just above the subframe. looks like I should be ok if it's above the hub center. Thanks
Quote:
Originally Posted by Elmo370z
Let me know how to Z fever kit works out for you.  |
I'll let you know which ever route I take
