Nissan 370Z Forum - View Single Post - New Stillen supercharger build Australia

TBatt · 06-28-2017, 10:29 AM

We have been there, go with the TopgunZ A2A system. The rest of the Stillen kit is okay if you stay with a max of 9psi.

While you are doing the fuel pump mod, go ahead and use the CJM pump installation kit and billet top hat. Do that pain in the AXX job once and be done with it. To me the fuel pump mod was the worst part of the install, then I had a bad pump and had to do it again and then a bad hose and had to do it again.

I would gladly install two Stillen intake manifolds for one fuel pump remove, modify and replace. Make dang sure you get the fuel pump done right the first time........

06-28-2017, 10:29 AM	#11 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	We have been there, go with the TopgunZ A2A system. The rest of the Stillen kit is okay if you stay with a max of 9psi. While you are doing the fuel pump mod, go ahead and use the CJM pump installation kit and billet top hat. Do that pain in the AXX job once and be done with it. To me the fuel pump mod was the worst part of the install, then I had a bad pump and had to do it again and then a bad hose and had to do it again. I would gladly install two Stillen intake manifolds for one fuel pump remove, modify and replace. Make dang sure you get the fuel pump done right the first time........ __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!