Quote:
Originally Posted by joej370
Okay so I did some digging on the forum already and noticed this happens for a few reasons
I checked that the actual button works properly it does
I do only have the rear speed sensors in due to my voodoo angle kit not allowing speed sensors in the front worked speed sensors were fine for a long time after the install
The last time I drove the car the spedometer wasn't working so idk
I tried removing the rear speed sensors and still having same problem that keeps the key light on the dash
So the only other thing I've read it could be is the steering lock box and I must be lucky to have it fail in the open position but I'm currently spinning the steering wheel with no key and it's not locking
Not sure how to get the start button to turn the car off properly not sure which problem is causing what hoping someone informed can guid me through
Key light is on on dash ,speedo not working, steering wheeling not locking , car won't turn off by tapping the button I have to hold for 3 secs
Car is a track car in progress before I start getting all the hate just hoping someone knows this electrical system better than i
|
I had a similar problem when I didn't shut the car off and killed the battery. The car would not shut off unless I held the button. Once the battery was fully charged, everything worked properly. So, re: the car not shutting off, put the battery on a charger, let it fully charge, then try again. Verify that you have 13.5 to 14.5 VDC at the battery (demonstrates that the alternator is working). The challenge with tearing stuff out to make a track car, you forget and kill something that allows the alternator to work properly....
GL