Hi all I'm looking for some guidance with installing my BP single oil-less turbo kit on my 08 350z HR. The instructions supplied with my HR kit are for a 370z....although they are similar there are a handful of differences.
I am trying to see where I need to tap my coolant lines both feed and return. The instructions I have don't seem to mention anything about installing and tapping cooling lines for the turbo.....its possible that maybe they just never got printed?
Here's what is supplied with my HR kit and some of my confusion.
One line is slightly longer
[IMG]
[/IMG]
One of the Coolant T's has a small fitting or plug
[IMG]
[/IMG]
The other coolant T does not have the fitting or plug
I'm assuming these are the fittings that go into the turbo coolant ports but they cannot be fully twisted in unless I disassemble the turbo.....was not sure if that would be normal......also is one of the ports on the turbo an (in) and the other one an (out) or does it even matter?
[IMG]
[/IMG]
I also have these 2 fittings that also fit into the turbo ports....not sure if this is what they are for though.
[IMG]
[/IMG]
I am basically not sure how to hook this stuff up or at least how I am supposed to according to the directions because there are none.
Thank you for any help or pics showing this process.