Had codes done by a very nice scanner, It looks like since I changed the Mafs those have not shown back up, the Major codes I got this time were Lean Bank codes 1 and 2
P0171 Lean Bank 1 - This was stored when I ran the codes
P0174 Lean Bank 2 - This showed up after a clear -
Then my car died After letting it get hot for a while, We took a break, I went to leave, and it sputtered and stalled until sufficient time passed it cooled and was able to start.
We are possibly leaning twords a fuel issue now that maf codes are gone.
Failing pump?
Just to be thorough and for knowledge in the post, Here is a full list of codes that first pulled some may be redundant and coincidence from messing with stuff, most are my steering lock (pulled fuse) I think.
B2014 - Chain of Steering lock BCM
B2562 - Low Voltage
B2607 - Lock Relay
B2609 - Lock Status
B260A - Ignition Relay
B26E8 - Clutch Interlock Switch
B2109 - Lock relay off
Engine stuff
P0300 - random multiple Misfires
P0171 - Too lean Bank 1
Po174 - Too lean Bank 2
Thats all I got this time around.
__________________
 Red 370z Sport 6m
Mods: Stillen 25 row Race Oil cooler|FIXED ESCL|Muffler delete|TEIN Springs|Tint|Varrstoen ES2 Rims|NRG Stealth Knob|Kenwood touchscreen|
|