Nissan 370Z Forum - View Single Post - Topgunz

ChaseZ · 06-09-2017, 06:26 PM

How do they plan on piping the cold air side to the drivers manifold??

I've thought of similar for the air filter, but would order a BeCool rad that is perhaps 3" narrower so the entire rad support on the drivers side can be relocated out of the way and have a straight shot into the blower.

It also wouldn't be terribly difficult to make a new SC bracket to slide it a little further outward. Move the fuse box and would have a good few inches. Just need a longer SC belt on the backside, rest would stay the same. Could address that Mickey Mouse Stillen tensioner at the same time.

06-09-2017, 06:26 PM	#1789 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94683	How do they plan on piping the cold air side to the drivers manifold?? I've thought of similar for the air filter, but would order a BeCool rad that is perhaps 3" narrower so the entire rad support on the drivers side can be relocated out of the way and have a straight shot into the blower. It also wouldn't be terribly difficult to make a new SC bracket to slide it a little further outward. Move the fuse box and would have a good few inches. Just need a longer SC belt on the backside, rest would stay the same. Could address that Mickey Mouse Stillen tensioner at the same time. Last edited by ChaseZ; 06-09-2017 at 06:29 PM.