Quote:
Originally Posted by jchammond
You're gonna have people chime in who's been there & done that w/their Nismo...common fitment is +20---+25 up front & +10---+15 rear.
Your factory wheels are +40F/+23R.
So 15-20mm up front & around 10mm/R,
Wait till after your suspension mods/alignment & make a plumb line on level ground-then measure up your gaps....you may want to be conservative or aggressive.
That would be my recommendation,so you can get the fitment you desire.
Sent from my iPhone using Tapatalk
|
Excellent! Thank you.
Yeah, I was getting tired when I posted last night and forgot to mention that I would be doing the spacers after the spring install. Who knows, I may like the fitment as is.
One thing I don't want is vibration. When I had the 25mm Z1 spacers installed on the stock 18's and tires, I always got vibration up at 55+ mph, especially around 70-75 mph where I cruise at on the highway. It was annoying as hell too.
And yes, they were installed properly, and even double checked a few days later to try and resolve the vibration issue.