Quote:
Originally Posted by Fantastic Z
I had a similar rattle and I found the culprit. It was for me a under dash support brace. The two pieces of metal where the weld were wasn't connected all the way and under a certain load, the dash would rattle. I simply used long reach pliers to bend the metal outwards slightly to stop it.
Here are the pics and in the second one you can see the tooling marks from the pliers.
Attachment 84227
Attachment 84228 |
Hello all,
I know this is an old thread, but I think it's worth mentioning that this solution is really useful.
For a long time, I thought the rattle came either from the door or right under the dash and only at certain RPMs. The solution proposed by the dealer usually involved removing the dash. Being old-school I suppose, I preferred to have the small rattle rather than removing the dash and risking more issues.
This week I found this thread and the solution was really simple! The brace would rattle even when I tapped the bracket. In my case, I didn't bend the metal, I just placed some pipe insulation between the two pieces that rattle and problem solved.
I wanted to say thanks not only for finding the problem but for adding the photos to help locate it.