Nissan 370Z Forum - View Single Post - Can anyone clarify the proper wiring needed on Touring w/navi for a LOC for 5ch amp

CKDrums · 03-04-2017, 05:11 PM

I believe I've found the proper color code for all the speakers. Aside from the front right door - and left door - both being labeled pin#5 violet (per the pin chart that was posted). I'm cutting the speaker signals input wires (before the Bose amp) and routing them to my LCQ-1. But only tapping the white wire and routing it to my remote in. I'm also leaving the main Bose amp connected and hooked up but removing the Bose sub amp.

PLEASE CORRECT ME IF I'M WRONG!!!

I do have a question. Do I use the front tweeter or door speaker signal wires to my LOC front inputs?
Or do I jump the rear speaker signal wires to both front and rear inputs on my LOC. Thus loosing my fader at the stereo?
I say this because I'm assuming the 370's rear speaker signal wires are full range. Any help?

I'm using a AudioControl LCQ-1 LOC

Not sure if anyone's reading this but thanks to anyone that can help me.

03-04-2017, 05:11 PM	#2 (permalink)
CKDrums Base Member Join Date: Jan 2017 Location: Beach South Carolina Posts: 25 Drives: 09 Nissan 370Z T Spo Rep Power: 8	Spent a few more hours searching. 09 Touring w/navigation I believe I've found the proper color code for all the speakers. Aside from the front right door - and left door - both being labeled pin#5 violet (per the pin chart that was posted). I'm cutting the speaker signals input wires (before the Bose amp) and routing them to my LCQ-1. But only tapping the white wire and routing it to my remote in. I'm also leaving the main Bose amp connected and hooked up but removing the Bose sub amp. PLEASE CORRECT ME IF I'M WRONG!!! I do have a question. Do I use the front tweeter or door speaker signal wires to my LOC front inputs? Or do I jump the rear speaker signal wires to both front and rear inputs on my LOC. Thus loosing my fader at the stereo? I say this because I'm assuming the 370's rear speaker signal wires are full range. Any help? I'm using a AudioControl LCQ-1 LOC Not sure if anyone's reading this but thanks to anyone that can help me. __________________ Last edited by CKDrums; 03-04-2017 at 05:17 PM.