Nissan 370Z Forum - View Single Post - Camber setting

Hotrodz · 02-21-2017, 05:35 PM

I run re11s for my street use on Nismo wheel and r888 295 squar on 18x10.5 rims. I can't remember toe settings off the top of my head but my camber is -2.6 front and -2.0 rear. After consulting with a few track day folks they said you need to run toyo's with higher psi as they will get squirrely on you wear badly. They say to aim for a hot temp of 40 to 42 psi. I ran this past weekend with 35 psi front and 33 rear and when I I took the temp post session they were 40 psi the tires showed no unusual wear.

Sent from my SM-N910P using Tapatalk

02-21-2017, 05:35 PM	#8 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I run re11s for my street use on Nismo wheel and r888 295 squar on 18x10.5 rims. I can't remember toe settings off the top of my head but my camber is -2.6 front and -2.0 rear. After consulting with a few track day folks they said you need to run toyo's with higher psi as they will get squirrely on you wear badly. They say to aim for a hot temp of 40 to 42 psi. I ran this past weekend with 35 psi front and 33 rear and when I I took the temp post session they were 40 psi the tires showed no unusual wear. Sent from my SM-N910P using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|