This past weekend we went to Darlington dragway to lower the quarter mile record that we had set late last year after making a few changes in regards to power and suspension. With our first run off the trailer we were able to better our mph by 2 mph from our record time but had alot of wheel spin. We made some suspensions changes to reduce the wheel spin and went out again for our second attempt. We knew it was going to be a good run as it was one of the best burnouts we had done in the vehicle, car launched annnnnnnnnnnnndddd the passenger side axle broke.
We knew that this was going to be one of the last times that we were going to go out on the stock block and attempt to lower the 1/4 mile time that we had set back in the later part of last year. *Nonetheless, we cannot be disappointed as this vehicle has seen a lot of abuse including three half miles events, 30+ dragstrip passes, 100+ dyno pulls, almost a year at 700 wheel horsepower and this was the first thing to break! *Now it's time to focus our attention on the build that we plan to premier at ZDAYZ - 1000+ wheel horsepower and 9 second 1/4 mile capable (possibly lower)....stay tuned as version two of this car is going to be absolutely bananas!