Originally Posted by DOOMMONKEY777

Ferely easy,

1) remove the wheel
2)remove brake caliper, do not unbolt the brake hose, grab a few bungie cords and hang it there.
3) remove brake rotor, I had to use a tripod to remove mine, thing was stuck good.
4) remove abs sensor from where the bearing is at
5) remove 4screws from the back of the bearing housing I think they r #17
6) grab a slide hammer, attach it to the bearing, and hit it out.
7) insert the new bearing, and try to grab it with the bolts, tighten the 4 bolts star pattern, to equalize the pulling force for even pull.

Put everything back together.


That's pretty much it.