Ferely easy,
1) remove the wheel
2)remove brake caliper, do not unbolt the brake hose, grab a few bungie cords and hang it there.
3) remove brake rotor, I had to use a tripod to remove mine, thing was stuck good.
4) remove abs sensor from where the bearing is at
5) remove 4screws from the back of the bearing housing I think they r #17
6) grab a slide hammer, attach it to the bearing, and hit it out.
7) insert the new bearing, and try to grab it with the bolts, tighten the 4 bolts star pattern, to equalize the pulling force for even pull.
Put everything back together.
That's pretty much it.
__________________
Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you.  537whp/496lb/tq@8-9PSI 93 octane
|