Nissan 370Z Forum - View Single Post - Jim Wolf Cam testing for the VQ37VHR -- Results inside!

Z eliminator · 02-07-2017, 09:41 AM

I will be running my 4.5 stroker N/A with full bolt on's
the Block is at Darton now being sleeved now.
The heads are done and my Jun cams should be installed in them, stage 3 GTM
Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT.
11.1 comp, 3200 rpm stall torque converter
will dyno with the M370 intake and the factory intake as well.

Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264
I have the GTM stage 2 SC going on after the 1/4 mile runs.
it should run 11.87 N/A, 10.92 with the SC
it should be on the road late summer
Its not being built by Gamma, but by the company who designed the stroker for GTM.

Z

02-07-2017, 09:41 AM	#245 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	I will be running my 4.5 stroker N/A with full bolt on's the Block is at Darton now being sleeved now. The heads are done and my Jun cams should be installed in them, stage 3 GTM Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT. 11.1 comp, 3200 rpm stall torque converter will dyno with the M370 intake and the factory intake as well. Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264 I have the GTM stage 2 SC going on after the 1/4 mile runs. it should run 11.87 N/A, 10.92 with the SC it should be on the road late summer Its not being built by Gamma, but by the company who designed the stroker for GTM. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 02-07-2017 at 09:44 AM.