Nissan 370Z Forum - View Single Post - What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

TexasChuck · 01-21-2017, 04:31 PM

JARblue,
I was able to access from the top, without removing the front bumper. I removed the black scroud/cover, held by the 12 or so plastic fasteners, then I could reach inside. There is a stud there on the drivers side to mount a second horn to. You'll need a metric lock nut. I also had to remove that metal piece which has the stud and the hood latch fastened to it from the left (drivers) side just to get the horn down in there. I tied a line to the horn so if I dropped it, I could retrieve it.
I didn't remove the existing so I don't know how the electrical connections unplug . I did tug on it some and it didn't come right off. Judging by all the posts I've seen from you, it should be pretty straight forward. It's just really tight in there.
Let me know,
Regards

01-21-2017, 04:31 PM	#8943 (permalink)
TexasChuck Track Member Join Date: Oct 2012 Location: SE Texas Posts: 556 Drives: 2014 Black Cherry Co Rep Power: 14	Horn Install JARblue, I was able to access from the top, without removing the front bumper. I removed the black scroud/cover, held by the 12 or so plastic fasteners, then I could reach inside. There is a stud there on the drivers side to mount a second horn to. You'll need a metric lock nut. I also had to remove that metal piece which has the stud and the hood latch fastened to it from the left (drivers) side just to get the horn down in there. I tied a line to the horn so if I dropped it, I could retrieve it. I didn't remove the existing so I don't know how the electrical connections unplug . I did tug on it some and it didn't come right off. Judging by all the posts I've seen from you, it should be pretty straight forward. It's just really tight in there. Let me know, Regards