Nissan 370Z Forum - View Single Post - 6MT Shift Gate Feels Different After CSC Replacement

lj909 · 01-16-2017, 06:22 PM

I just dropped my trans myself and has this issue after. I read through the fsm because i knew changing the trans fluid couldn't cause this. There is a procedure when reassembling the shifter. When placing the guide plate, your supposed to put it into 6th, tighten one bolt, then put it into 5th and tighten the other bolts.

So basically your plate isn't in the right spot and it's letting your shifter go over too far then you have to pull it back a little to find the right spot.

01-16-2017, 06:22 PM	#2 (permalink)
lj909 Track Member Join Date: May 2014 Location: Riverside Posts: 584 Drives: 40th 370Z Rep Power: 12	I just dropped my trans myself and has this issue after. I read through the fsm because i knew changing the trans fluid couldn't cause this. There is a procedure when reassembling the shifter. When placing the guide plate, your supposed to put it into 6th, tighten one bolt, then put it into 5th and tighten the other bolts. So basically your plate isn't in the right spot and it's letting your shifter go over too far then you have to pull it back a little to find the right spot. __________________ PW 07 HR350Z R.I.P. Totaled by 82yr old woman 2010 40th Anniversary 370Z