View Single Post
Old 01-04-2017, 06:14 PM   #1336 (permalink)
BOLIO 671
A True Z Fanatic
 
BOLIO 671's Avatar
 
Join Date: Mar 2010
Location: GUAHAN
Posts: 1,198
Drives: To & From then Back
Rep Power: 3399
BOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond reputeBOLIO 671 has a reputation beyond repute
Default

Quote:
Originally Posted by TopgunZ View Post
Your BPV needs to be open at idle. If anything you should loosen it. When i had the turbosmart on i had bought the lightest (blue) spring and even trimmed off a ring and a half to get the perfect amount of tension on the piston head of the valve. But, i did have the SI trim and 9psi pulley so it was pushing more air at idle. You should be able to trim down any of the springs to get the tension right.
OK....have it at the softest setting and it's still closed. How far open does it need to be? Do u think this is the reason I am.getting high Idle? We ran a smoker and couldn't find any vacuum leaks. Tried doing a Idle Learning via EcuTek but the tests failed and made my idle worse. Now idling at 1400-1500 RPM.

Weird thing is this just started happening. When I first cranked the car my idle was where it should be.....high 700s low 800s (RPM). Thinking it may be the Throttle Chambers but I'm not getting any codes for that.
__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34
BOLIO 671 is offline   Reply With Quote