Quote:
Originally Posted by BOLIO 671
Being that the charger is on the bracket, wouldn't that keep it off the frame? During the install I know that we double checked to ensure that the volute was not touching the frame and tried to follow the spacing as close to the pics you provided on the install manual. The vibration only happens for me on initial start up. I will double check everything again just to make sure as soon as I figure out this issue with my idle.
|
Check the clearance from the cross brace to the throttle bodies. Mine was almost touching and was causing knocks and rattles. I used 1/2 inch spacers to slightly raise the cross brace and that fixed the problem.
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!
|