Nissan 370Z Forum - View Single Post

SG4247 · 12-26-2016, 11:49 AM

Could not be done on my car with factory parts. About -1.5 camber is as far toward zero - as it would go.

I installed adjustable rear camber arms, and dialed the camber to zero. At that point, the toe is way off and would not correct with factory toe bolts. So, I then had to install SPC toe bolts to get 1/16" toe per side.

Car drives awesome with this rear set up. Very pleased with the result!

12-26-2016, 11:49 AM	#6 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 782 Drives: 2010 touring Rep Power: 7842	Could not be done on my car with factory parts. About -1.5 camber is as far toward zero - as it would go. I installed adjustable rear camber arms, and dialed the camber to zero. At that point, the toe is way off and would not correct with factory toe bolts. So, I then had to install SPC toe bolts to get 1/16" toe per side. Car drives awesome with this rear set up. Very pleased with the result! Last edited by SG4247; 12-26-2016 at 03:57 PM.