Nissan 370Z Forum - View Single Post - Hardware needed for REAR Zero camber and 1/16" Toe?

SG4247 · 11-15-2016, 03:11 PM

I have checked the factory setting on my car, It is set at -2.0 degrees.

If I fully adjust the factory bolts it only comes down to -1.5 degrees.

I have the SPC camber bolts here, but it doesnt look like after grinding, it will make it to zero.

If aftermarket camber arms will get me to zero, I will ditch the SPC bolts and the grinding work.

NEED some help.

11-15-2016, 03:11 PM	#3 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	I have checked the factory setting on my car, It is set at -2.0 degrees. If I fully adjust the factory bolts it only comes down to -1.5 degrees. I have the SPC camber bolts here, but it doesnt look like after grinding, it will make it to zero. If aftermarket camber arms will get me to zero, I will ditch the SPC bolts and the grinding work. NEED some help. Last edited by SG4247; 11-15-2016 at 04:46 PM.