Nissan 370Z Forum - View Single Post - Hardware needed for REAR Zero camber and 1/16" Toe?

SG4247 · 11-15-2016, 01:19 PM

So, I have a bone stock 2010 touring, factory ride height and tires. I have adjusted the rear factory camber bolts all the way inboard, and the wheels are still not vertical.

I want the rear camber at zero, with just a little toe.

Will the SPC camber/toe bolts get me to zero camber - with the inboard slot grinding using the template?

Is there a camber arm available, that will get me to zero camber, without grinding on my car?

There is a lot of discussions about installs on the forum, but no post install alignment data shown.

Any real experience with post install rear alignment specs would be appreciated.

SG4247

11-15-2016, 01:19 PM	#1 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	Hardware needed for REAR Zero camber and 1/16" Toe? So, I have a bone stock 2010 touring, factory ride height and tires. I have adjusted the rear factory camber bolts all the way inboard, and the wheels are still not vertical. I want the rear camber at zero, with just a little toe. Will the SPC camber/toe bolts get me to zero camber - with the inboard slot grinding using the template? Is there a camber arm available, that will get me to zero camber, without grinding on my car? There is a lot of discussions about installs on the forum, but no post install alignment data shown. Any real experience with post install rear alignment specs would be appreciated. SG4247 Last edited by SG4247; 11-15-2016 at 01:22 PM.