Nissan 370Z Forum - View Single Post - [For Sale] PPE headers, high-end suspension, Takeda cold air, and more

j-rho · 09-15-2016, 11:58 PM

(click for supersize)

Buncha stuff here, also a great car with <2000 miles they came off of: 2014 370z sport, now stock-ish, $23,500 OBO

Really prefer local pickup in San Diego but will ship for the cost of shipping + $30 to cover the effort and materials of packaging.

PPE long-tube equal-length 304 stainless headers with optional parallel merge collectors and high-temp ceramic coating. Used for 1000 miles. $2000 new, sell for $1000.

Custom built Koni 30-series double adjustable shocks. Valving done to match a set of shocks that have now won 3 national championships on 350Zs. Fronts have custom aluminum top hats with spherical bearings, lower have sphericals with custom aluminum spacers. Will include a pair of Hypercoil front springs in either 1100 or 1200lb./in. Rear have custom aluminum top hats with spherical bearings also. About 1500 miles on the shocks. Cost to replicate new over $3k, asking $1500.

Adapter set up to run 2.5" spring in the rear of a 350/370z. Not sure who makes it, Buddy Club I think? $100. If you want a pair of helper and main springs with it (650,700, or 800 lb./in.) add another $50.

Takeda "Attack" cold air intake. As it comes it's an obnoxious shiny polished aluminum, the pipes have all been powdercoated a charcoal gray. Matches the underhood color of a Gun Metallic Z perfectly, but would look OE under any color car. Similar power gains to the Stillen G3 but doesn't require cutting up the car. $495 new, asking $240. Has a CARB E.O. sticker applied.

Z1 motorsports drilled and slotted front rotors. Each rotors is 10lb. lighter than stock - it's unsprung rotating weight, which is a big deal. Only used with stock brake pads on street and autocross for about 700 miles, so they are practically new and were never really worked hard. $500 new, asking $250.

Kinetix front upper control arms. Modified for additional negative camber, I ran around -4. $325 new, asking $150.

Set of 4 OEM TPMS sensors in a pressurize-able container. Use this to trick your car into thinking its tires are fully inflated so you don't have to see that annoying low tire light on the dash. Fits in the glovebox. $80.

Underdrive pulley kit with belt. Never put on the car. I don't even remember who made the kit, think it's Unorthodox. $120

Buddy Club seat rail for driver side. $120

Swaybars-
Eibach 29mm front bar, powdercoated charcoal gray, $120
Hotchkis front and rear bar set, $200 for both

Or buy this car and I'll throw in a bunch of this stuff for free!!

09-15-2016, 11:58 PM	#1 (permalink)
j-rho Base Member Join Date: Jul 2014 Location: San Diego Posts: 154 Drives: 1967 Camaro Z28 Rep Power: 11	PPE headers, high-end suspension, Takeda cold air, and more (click for supersize) Buncha stuff here, also a great car with <2000 miles they came off of: 2014 370z sport, now stock-ish, $23,500 OBO Really prefer local pickup in San Diego but will ship for the cost of shipping + $30 to cover the effort and materials of packaging. PPE long-tube equal-length 304 stainless headers with optional parallel merge collectors and high-temp ceramic coating. Used for 1000 miles. $2000 new, sell for $1000. Custom built Koni 30-series double adjustable shocks. Valving done to match a set of shocks that have now won 3 national championships on 350Zs. Fronts have custom aluminum top hats with spherical bearings, lower have sphericals with custom aluminum spacers. Will include a pair of Hypercoil front springs in either 1100 or 1200lb./in. Rear have custom aluminum top hats with spherical bearings also. About 1500 miles on the shocks. Cost to replicate new over $3k, asking $1500. Adapter set up to run 2.5" spring in the rear of a 350/370z. Not sure who makes it, Buddy Club I think? $100. If you want a pair of helper and main springs with it (650,700, or 800 lb./in.) add another $50. Takeda "Attack" cold air intake. As it comes it's an obnoxious shiny polished aluminum, the pipes have all been powdercoated a charcoal gray. Matches the underhood color of a Gun Metallic Z perfectly, but would look OE under any color car. Similar power gains to the Stillen G3 but doesn't require cutting up the car. $495 new, asking $240. Has a CARB E.O. sticker applied. Z1 motorsports drilled and slotted front rotors. Each rotors is 10lb. lighter than stock - it's unsprung rotating weight, which is a big deal. Only used with stock brake pads on street and autocross for about 700 miles, so they are practically new and were never really worked hard. $500 new, asking $250. Kinetix front upper control arms. Modified for additional negative camber, I ran around -4. $325 new, asking $150. Set of 4 OEM TPMS sensors in a pressurize-able container. Use this to trick your car into thinking its tires are fully inflated so you don't have to see that annoying low tire light on the dash. Fits in the glovebox. $80. Underdrive pulley kit with belt. Never put on the car. I don't even remember who made the kit, think it's Unorthodox. $120 Buddy Club seat rail for driver side. $120 Swaybars- Eibach 29mm front bar, powdercoated charcoal gray, $120 Hotchkis front and rear bar set, $200 for both Or buy this car and I'll throw in a bunch of this stuff for free!! Last edited by j-rho; 09-18-2016 at 03:45 PM.