Nissan 370Z Forum - View Single Post

RJ MFG · 08-26-2016, 04:43 PM

Ladies and Gentlemen,

We are proud to announce that RJ MFG will be offering Porting Services!

We will be offering two types of porting (Traditional Hand Porting and CNC Porting). We can port everything from your throttle bodies all the way through your heads! Have anything else you would like to have ported please send us a message or give us a call. Our porting team has the skills utilized by the top NHRA and Formula Boat teams!

Check out the latest work we just finished for Bullitt5897 and the White Dragon!

What did he have done?
1. EPS 70mm Throttle Bodies Ported and a few NHRA mod tricks thrown in for good measure!
2. Port Matched EPS Throttle Bodies and Greddy GTR intake ports (Ported gaskets, TB and Manifold)
3. Greddy GTR intake runners MASSIVELY ported... Nearly 10mm were taken out of these intakes to allow them to match up to his RJ MFG Lower!
4. RJ MFG Lower was ported to match the new Greddy runners and the new larger Intake ports on his heads!
5. VQ37HR Intake ports on his heads were cleaned up and enlarged to give the maximum amount of flow possible.
6. VQ37HR Exhaust Ports received MASSIVE amounts of Porting and clean up work! This is where the power is at and we took an additional 4mm of material out of his head.

So without further ado check out his new port work! Courtesy of RJ MFG:

Throttle Body:

Greddy Intake:

RJ MFG Lower Conversion:

VQ37HR Heads:

Intake Side:

Exhaust side:

08-26-2016, 04:43 PM	#1 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 284	RJ MFG Now Offers Full Porting Services! Ladies and Gentlemen, We are proud to announce that RJ MFG will be offering Porting Services! We will be offering two types of porting (Traditional Hand Porting and CNC Porting). We can port everything from your throttle bodies all the way through your heads! Have anything else you would like to have ported please send us a message or give us a call. Our porting team has the skills utilized by the top NHRA and Formula Boat teams! Check out the latest work we just finished for Bullitt5897 and the White Dragon! What did he have done? 1. EPS 70mm Throttle Bodies Ported and a few NHRA mod tricks thrown in for good measure! 2. Port Matched EPS Throttle Bodies and Greddy GTR intake ports (Ported gaskets, TB and Manifold) 3. Greddy GTR intake runners MASSIVELY ported... Nearly 10mm were taken out of these intakes to allow them to match up to his RJ MFG Lower! 4. RJ MFG Lower was ported to match the new Greddy runners and the new larger Intake ports on his heads! 5. VQ37HR Intake ports on his heads were cleaned up and enlarged to give the maximum amount of flow possible. 6. VQ37HR Exhaust Ports received MASSIVE amounts of Porting and clean up work! This is where the power is at and we took an additional 4mm of material out of his head. So without further ado check out his new port work! Courtesy of RJ MFG: Throttle Body: Greddy Intake: RJ MFG Lower Conversion: VQ37HR Heads: Intake Side: Exhaust side: __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf