Thread
:
First STILLEN Supercharger 370Z swiss
View Single Post
08-20-2016, 05:10 AM
#
411
(
permalink
)
swiss370Z
Track Member
Join Date: Jun 2011
Location: In the Mountains
Posts: 649
Drives: VW UP! 1.0 Ltr
Rep Power:
15
Some UPdates of the progress:
Installed new Davies Craig pump and connected:
Davies Craig EBP40 is a brushless 12 volt, high flow (37litres / 9.77 gallons per minute), magnetically driven water pump
The small pump provides much more water than the "BIG MAMA" bevor
The only problem is that the pump can not be well controlled by the electronics (only between 9-12 volts)
But I have already been tested and found that at about 10.7 volts is the best result.
Here are a few shots of the new 90mm intake pipe in the front:
No obstruction of air flow into the Vortech- Supercharger
Here are a shot of the new MAP-Sensor (BOOST & AIT) in the Plenum:
Some Testresults follows in the next Weeks
Attached Images
1-IMG_3518.JPG
(348.4 KB, 374 views)
1-IMG_3522.JPG
(307.7 KB, 376 views)
1-IMG_3523.JPG
(267.9 KB, 373 views)
1-IMG_3526.JPG
(212.3 KB, 375 views)
1-IMG_3530.JPG
(244.0 KB, 370 views)
1-IMG_3532.JPG
(282.0 KB, 371 views)
1-IMG_3528.JPG
(228.6 KB, 372 views)
__________________
/// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///
swiss370Z
View Public Profile
Send a private message to swiss370Z
Find More Posts by swiss370Z