Nissan 370Z Forum - View Single Post

jcosta79 · 08-15-2016, 03:27 PM

Installed the 34-row Setrab cooler with thermostatic thingy this weekend. Temps were pushing 240 with the high temps we've been having lately (105+) and that was just driving home from work, not even remotely pushing the car hard. Temps are now between 180 and 210.

Install was fairly straightforward but not quite as simple as others made it seem. Not sure if that was because of it being a Nismo versus a regular 370, but fitment was not a simple bolt on process. It took me about 7 hours over 2 days to complete the installation.

The quality of the parts are excellent and in the end everything works perfectly. Car is not pulling nearly as much timing due to heat, even in triple digit temperatures and you can feel the difference behind the wheel. Couldn't be happier.

Sent from my SM-N910T using Tapatalk

08-15-2016, 03:27 PM	#1 (permalink)
jcosta79 A True Z Fanatic Join Date: Jul 2012 Location: N/A Posts: 1,430 Drives: N/A Rep Power: 15	Installed Z1 Oil Cooler Installed the 34-row Setrab cooler with thermostatic thingy this weekend. Temps were pushing 240 with the high temps we've been having lately (105+) and that was just driving home from work, not even remotely pushing the car hard. Temps are now between 180 and 210. Install was fairly straightforward but not quite as simple as others made it seem. Not sure if that was because of it being a Nismo versus a regular 370, but fitment was not a simple bolt on process. It took me about 7 hours over 2 days to complete the installation. The quality of the parts are excellent and in the end everything works perfectly. Car is not pulling nearly as much timing due to heat, even in triple digit temperatures and you can feel the difference behind the wheel. Couldn't be happier. Sent from my SM-N910T using Tapatalk __________________ 2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel