Quote:
Originally Posted by CJBinder
So I went and bought a multi meter. The lowest setting I can put it on for ohms is 200. I tested the resistors I have in place and was testing with and it shows .9 or .8. When I test against a new one it is 5.5 around.
So I am assuming the resistors I bought were crap since new ones are reading 5.5 and connected and used ones are at .9 or .8.
Does anyone have a valid link to quality resistors that are the right resistors?
|
How are you testing the resistors you have in place?
Using the terminals on the connector will give you odd readings that will cause you to think the resistors are bad. Had the same issue when I did mine a few years ago.