Quote:
Originally Posted by vortrex
I talked to my local powdercoater (who is a car guy, does lots of wheels) and he said there would be no issue. he says they would not use the "bake-off" oven to remove the existing finish, since that does get substantially hotter than the powdercoat oven. he said a metallurgist had tested some wheels he had coated before and there was no issue.
|
Good to hear!
Quote:
Originally Posted by Mike
RCZs is the first firsthand case I have heard of that anyone actually had any damage from powdercoating, every other story has been anecdotal. I would like to know more about the damage please RCZ, as I have powdercoated many sets of wheels without problems, including my own wheels that I use on the track in both my corvette and 370. Many wheel companies are powdercoating them right out of the factory.
How did they crack when they did?
|
I'm interested also! Please tell the juicy detailsss
__________________
Fast Intentions / K&N / Blox / Evo-R / Uprev / Forgestar 19" F14 / R40 / NST / Z1 / SDCE / H&R / Kenwood / ISS Forged 20" FM10R
|