Originally Posted by Ryan@MRWorks

abgyak we will be doing a photoshoot with fxroar in the daytime that way we can capture the paint in the light not with a flash it tends to blow out the image. Unfortunately, we seriousy did not have enough time to do a thorough shoot of his vehicle as well it was dark and a lot of condensation and moisture outside it was in the freezing cold morning night when we compelted. Very hard to see what we were doing with a small lamp. We worked around his schedule because he needed his vehicle that same day and it definitely was not the right time of day to do a shoot. We worked from 6am to 3am in the morning just for fxroar Francis and we also fixed his Short Shifter that was seriously loose around the boot area two of the bolts were stripped replaced them with new ones. We also found a few mismatched bolts around his navi that were just lying around. When our customer complained of noises. We inspect everything we do thoroughly before we even approach it. We found a slight indent on his bumper as well and a kinked water hose and pointed it out along with putting in a new parking bulb just for him. We also re-inforced missing underpanel bolts that left his vehicles body plastics flapping around due to a local shop who lost 5 of the main bolts that hold that flaps up. We did this laborious work free of charge just because we care. Along with adding a on/off switch and ran 16ft. of wire to the cabin to an existing location. No drilling of the firewall required. We snapped some very quick shots. Francis is in on our calendar in a few days. Anyway, more photo's soon to come very soon...