Nissan 370Z Forum - View Single Post

TBatt · 06-28-2016, 09:35 AM

A couple of weeks ago I installed an AEM Boost/AFR gauge that has data logging capability. It obviously already has the boost pressure and air fuel ratio information but what was missing was the engine RPM (tach signal). I contacted AEM and they sent me a link to MSD and a inductive sensor that they sell. Being inductive, it does not require you tapping into your cars wiring, it simply mounts to the 12V wire that either fires an injector or coil pack. It detects the signal using an inductive pickup and the re-creates the signal at the proper 12 volt level. Just what I needed.

Mine is on the way!

https://www.msdperformance.com/produ...ers/parts/8918

Rep points welcome!

06-28-2016, 09:35 AM	#1 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	Tach signal made easy A couple of weeks ago I installed an AEM Boost/AFR gauge that has data logging capability. It obviously already has the boost pressure and air fuel ratio information but what was missing was the engine RPM (tach signal). I contacted AEM and they sent me a link to MSD and a inductive sensor that they sell. Being inductive, it does not require you tapping into your cars wiring, it simply mounts to the 12V wire that either fires an injector or coil pack. It detects the signal using an inductive pickup and the re-creates the signal at the proper 12 volt level. Just what I needed. Mine is on the way! https://www.msdperformance.com/produ...ers/parts/8918 Rep points welcome! __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!