I just took it out and did 5 more after a set of three easier light stops to warm everything up. It's still just as bad, tons of judder.
I decided to put it up on jack stands and see if both wheels move freely. The passenger side front is nice and smooth when I spin it by hand. The driver side when pushed the same way stops within a quarter turn after I let go. Definately seems to stop too quickly to me, when compared to the passenger side.
Also I forgot about this part. I can hear a grumble noise coming from the front when driving at highway speeds and only when turning slightly right. When left I don't get the noise. May be related.
When bedding I did feel like it was going to the right slightly, but that could just be my perspective being on the driver side. The wheel didn't seem to pull and stayed straight.
I don't know what a wheel bearing going bad sounds like. In all my years I've never managed to destroy one.
|