Quote:
Originally Posted by tiller
Only had to replace the passenger side mount with my kit and they do supply bolts for installation to block but you reuse lower bolt to chassis,also I made a small tool to tighten the block bolts if someone is at the step so I didn't have to remove exhaust manifold.
|
Quote:
Originally Posted by Jinxx
I only replace the passenger side motor mounts ...I read that doing both made for heavy vibration and was recommended to leave the driver side stock
|
I only have the 1.5 kit so only doing the passenger side.
We have mocked up a tool so we do not have to take off the exhaust manifold and tighten the bolts down. Good to know about re-using the bolt for the chassis, will see how I can go about getting it off the old engine mount.