Nissan 370Z Forum - View Single Post

Dustin@Z1 · 12-30-2009, 06:44 PM

Hey Bucketman and other NISMO 370Z owners...here is how you install a Nissan Motorsports Oil Cooler onto a NISMO.

That lateral stabilizer..which is actually for Harmonics not for chassis stiffness (this is based on a discussion with a Nissan Motorsports Representative)...anyway...take that stabilizer, unbolt it from the front end. The FATTER end of the stabilizer comes factory on the driver side, right where you are installing the cooler. You will need to just flip it around 180 degrees putting the FATTER end on the passenger side. By doing this, it makes the NISMO/AUTECH label upside down but it does not hurt its performance.

Once you do that, you will be good to go on the installation.

12-30-2009, 06:44 PM	#6 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Hey Bucketman and other NISMO 370Z owners...here is how you install a Nissan Motorsports Oil Cooler onto a NISMO. That lateral stabilizer..which is actually for Harmonics not for chassis stiffness (this is based on a discussion with a Nissan Motorsports Representative)...anyway...take that stabilizer, unbolt it from the front end. The FATTER end of the stabilizer comes factory on the driver side, right where you are installing the cooler. You will need to just flip it around 180 degrees putting the FATTER end on the passenger side. By doing this, it makes the NISMO/AUTECH label upside down but it does not hurt its performance. Once you do that, you will be good to go on the installation.