Nissan 370Z Forum - View Single Post - Replacing the rear belt on the Stillen kit

TopgunZ · 05-01-2016, 11:09 AM

Nope. Just get a short 14mm on there. Stand by the drivers headlight, reach in with your left hand with the wrench on the left of the sypercharger. Use your right to come in from the other side to help get the wrench on. Push the wrench towards engine to loosen. You can only get 1/4 turn each time but it only needs about 4 full turns then it turns by hand.

05-01-2016, 11:09 AM	#2 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Nope. Just get a short 14mm on there. Stand by the drivers headlight, reach in with your left hand with the wrench on the left of the sypercharger. Use your right to come in from the other side to help get the wrench on. Push the wrench towards engine to loosen. You can only get 1/4 turn each time but it only needs about 4 full turns then it turns by hand. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 05-01-2016 at 11:11 AM.