Quote:
Originally Posted by TBatt
Does anyone have any pictures showing the intercooler and an oil cooler. I'm trying to visualize how they will share the space up front. I'm going with the Z1 25 row and now the TopgunZ A2A setup. This will be a fresh install of the SC kit and the A2A and oil cooler.
|
Ill try to grab some pics but it is pretty tight. There is plenty of room between the radiator and new intercooler to mount it. What kind of gets in the way is that little power steering cooler. I was able to mount them where there is around 3/4"-1" in between them. I also have a trans cooler on the other side that had to be moved back about an inch.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34
|