I got it working. I had to tighten everything up, then loosen up the hard line going to the master cylinder. I then had my wife slowly press the clutch down, while I simultaneously open the line a little to let the bubbles escape. Then I would crack the slave bleeder and repeat. Once I got a good flow from the slave, I only would bleed the slave.
__________________
Stillen G3, Stillen CBE, Berk HFC, Eibach Springs, H&R Spacers, PW:JDM Knob, RJM Clutch Assembly, Z1 Clutch & Flywheel, Zspeed HD CSC, Stillen Oil Cooler
|