Nissan 370Z Forum - View Single Post - Help with Code P1092: VVEL Control Shaft Position Sensors

Carbon_z · 04-13-2016, 12:11 PM

I replaced the VVEL relay in the engine bay (next to battery) there are 2 relays side by side. When the code came back I realized that both VVEL sensors going bad at the same time was rare..... so I replaced the VVEL module (found it online for $120, NEW is $800 from Nissan) swapped it in and never had an issue and never replaced any vvel sensor.

04-13-2016, 12:11 PM	#2 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	I replaced the VVEL relay in the engine bay (next to battery) there are 2 relays side by side. When the code came back I realized that both VVEL sensors going bad at the same time was rare..... so I replaced the VVEL module (found it online for $120, NEW is $800 from Nissan) swapped it in and never had an issue and never replaced any vvel sensor. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.