Originally Posted by juld0zer

Simple braided replacement lines wont fix or eliminate it. To get rid of it you need to remove the restrictor which is in the left fender well and get a custom 4mm braided line made up. Most braided lines for our cars are only -3AN. You'll understand the need for -4 inner diameter hose when you take out the restrictor piece and have a look at the hard line that goes INTO the restrictor. It will make you wonder whyyyyyyyyy Nissan, whyyy? Get the line made long enough to reach the slave cylinder port directly and terminate it with a union fitting rather than a banjo because the inlet to the banjo will probably be 3mm or 2.5mm.