Thread: Exhaust control valve or cutout?
View Single Post
Old 04-07-2016, 02:22 PM   #4 (permalink)
fusionchicken
Base Member
 
Join Date: Aug 2009
Location: socal
Posts: 18
Drives: 370Z 6mt, C6 Z06
Rep Power: 16
fusionchicken is on a distinguished road
Default
Quote:
Originally Posted by SouthArk370Z View Post
You can always install "orifice flanges" (blind flanges with a hole drilled in them) on the cut-outs. Start with a 3/8" or so hole. If not loud enough, drill out hole a little bigger; repeat as needed.
Thanks for your suggestion
__________________
2000 4runner | 1998 5mt accord sedan | 2000 integra gs-r | 1991 mr2 turbo | 2006 Evolution IX | 2003 s2000 | 2000 Subaru RSTi | 2008 Evolution X | 2007 Civic Si | 2007 Z4M | 2006 FX35 RWD
fusionchicken is offline   Reply With Quote