Forgot what step already....blind....lol.
Remove this one 10mm under the bumper. Daaaaamn! look at those sexy hairy legs!
Take off this plastic clip.
Now do everything you just did on the other wise of the bumper. Tail light, bumper clips and the 10mm under the car.
The bumper has 2 last screws on the corner where they meet the quarter panel. Pull the fender liner by the rear tires (pulls super easy at this point) and you will see the screw on the corner.
Do the same on the other side.
Bumper is ready to be pulled off. Pull on the corners gently and it will pull out. See pic.
Take off the harnesses. I have a extra wire as i mounted a back up cam. I had to take off the center piece housing thats held on by 5 screws as its attached to bumper.
Heres the spat for test fitting. I already fitted and sanded this a few days ago before doing my side skirts to realize i need to take the bumper off to work better. It already sat pretty flush but i need it to be flush as possible. It fits pretty good even without sanding.
