Nissan 370Z Forum - View Single Post - DIY: Oil Cooler (scratch built install, lottsa pics).....>.

tjlazer · 04-03-2016, 12:49 AM

As I was tightening the fittings I noticed one did not turn as much as the other so I had to stop. The other fitting seemed to be able to turn more on the threads. Did you have a hard time threading it on? Yeah the cooler is aluminum so it can bend easy. Sounds like you might be SOL. Might have to order another one. They're not that expensive. Be more careful next time and thread it on slowly. You can also wrap the fitting in a cloth to protect it from damage.

04-03-2016, 12:49 AM	#302 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	DIY: Oil Cooler (scratch built install, lottsa pics).....>. As I was tightening the fittings I noticed one did not turn as much as the other so I had to stop. The other fitting seemed to be able to turn more on the threads. Did you have a hard time threading it on? Yeah the cooler is aluminum so it can bend easy. Sounds like you might be SOL. Might have to order another one. They're not that expensive. Be more careful next time and thread it on slowly. You can also wrap the fitting in a cloth to protect it from damage. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV