Quote:
Originally Posted by osbornsm
JUST FOR REFERENCE:
Defi pressure gauges use a BSPT thread type.
So if you're wiring up a Defi pressure gauge, you'll need a tee adapter.
BSPT Male = into engine
BSPT Female = oem pressure switch
BSPT Female = Defi gauge sending unit
Additionally... this part is NOT AVAILABLE in any country by any manufacturer.
However, there is a BSPT x BSPT x NPT adapter available.
THEREFORE, we must use:- BSPT Male = into engine
- BSPT Female = oem pressure switch
- NPT Female = Defi gauge sending unit with an separate adapter from the BSPT Defi sending unit to the NPT threads of the adapter.
|
So I am going to make a custom manifold for this as my current setup of adapters is touching the sway bar.... What I am thinking is a block of aluminum with the following for ports, in a remote spot :
1/8" BPST female port, will have a flexible braided line from manifold to engine
1/8" BPST female port, for the OEM pressure sensor
1/8" BPST female port, for the Defi racer pressure sensor
Does this sound like the correct thread sizes? Just want to be sure before I buy a tap and drill holes.
Thank you