Quote:
Originally Posted by Elisechrs
What would you recommend cleaning with? I just had the Maf sensor cleaner from the auto store which to me essentially looks like a can of air duster....
|
I used the maf cleaner. Just spray and wipe. Over and over.
Quick rundown.
Remove plastic cover
Disconnect hoses and push aside.
Remove throttle body, DO NOT UNPLUG WIRE.
Rest them so the input opening is facing down resting on a lot of towels and rags to keep the goo from dripping on motor. Spray wipe, spray q-tip.
Once the inside of tb is done, repeat for air input side.
Bolt back up attach hoses.
This process took me at most 1 hr.
Why I cleaned mine. Every time I pulled up to a light my rpm would dip a few hundred then level back out. I would have hesitations on acceleration and intermittent check engine light.
Since the cleaning I have had zero problems.
Hope this helps.