Quote:
Originally Posted by gmr19
I installed on rear only. Stillen's website says you cannot install H&R DRM (type 2) spacers at all up front with OEM wheels. I know there is a bolt on the hub to prevent rear wheels from being accidentally installed on the front. Not sure if this is the cause, but you can remove that bolt. Or maybe the OEM front wheels do not have any kind of recess for the spacer stud to extend into.
reference: http://www.stillen.com/product.asp?i...SAN&model=370Z |
Quote:
Originally Posted by Jappbox
I removed the bolt up front as it does nothing, and installed the 20mm Type 2 Spacers. This worked fine. I didnt buy those type of spacers though. I got the Kics project brand without the center ring.
|
Ugh. I was trying to install my 20mm/25mm bolt on spacers tonight before TX2K16 tomorrow but came across that bolt in the front. I had no idea what it was for, but obviously, could not install the spacer with that. It was late, so I decided to just give up and come look on the forum about more info on that. What a dumb bolt.
I assume it's just a threaded on fastener that should be easy to remove without any hassle? Anyone know for sure before I run into another surprise trying to remove it?